Open forum for all things Formula SAE related.
The third round of testing at Calspan will be conducted on 21-22 June 2007. Four constructions are scheduled to be tested: + Michelin 21x8-13...
Greetings all, I’ve been sitting down in the odd spare minutes I’m getting here and there, and slapping together a bit of a thesis about what I...
Hi all, I've put this list together last year, and made it available to guys on our team and will do the same this year. It's up to individuals...
Unfortunately, there is no LINKS page on the FSAE.com website, so I put one together to help everyone. If you have any more, just post a reply,...
The FSAE team at Western Washington University has agreed to host a CAD file library for everyone. This will be a central place for teams to share...
Can anyone recommend some reading material on heat exchanger design? So far I hav been relying on intercooler theory on the web and old fluids and...
If you're new here, it's very likely that among almost 5000 forum members and close to 50,000 posts, your question has been asked. Well, at least...
There have been a number of papers written by participants of FSAE on various Formula SAE topics. Your university library may have the ability to...
Everyone, I would like to announce a new set of tutorials being created by SolidWorks, specific to the Formula SAE competition. The first video,...
Can any one tell me how to calculate runner length?
http://www.dtafast.co.uk/images/SX-Wheel%2001_550.jpg is this steering wheel suitable for this rule or not thank you
what is the average speed that vehicles inter this curve ?? thank you
http://img801.imageshack.us/img801/913/sssba.png i have a problem in the rear sus side view geometry .. as i 've designed for a 22% anti-squat ,...
Has anyone built a FSAE car with a chassis structure fabricated primarily from plywood? It seems that a fairly high stiffness-to-weight ratio...
Hey everybody, got a few questions about weight transfer. Read a lot in the forum an in Millikens and Smiths book but it was not satisfying enough...
can any one tell me how to calculate velocity of air through restrictor(nozzel)
As per the rulebook we have to apply a vertical load of 10g, and horizontal load of 20g. For this calculation should the g force be according to...
Does anyone know if there is any significant disadvantage to mounting a front brake caliper on the front of the rotor as opposed to the rear...
Curious to see how testing has been going for anyone who purchased the new Taylor Race diff this year? We were strongly considering it, but I was...
Hey all We have just purchased the standard, Fsae recommended, impact attenuator and are currently facing the problem of how to attach it to the...
Hi all, I'm looking to create a score sheet or something along those lines to determine who gets to drive our car. Factors that could influence...
Hi! anybody knows what's the best transmission for an electric engine?
A “heads-up” for those of you who are planning to attend the SAE Congress in 10 days time, or who are within driving distance of Detroit. The...
Could anyone guide me through selecting a good indian bike caliper ? Pistons diameter for indian bikes are unavailable? Any details regarding about...
Hello, How much is necessary to be a volume of paint ball air tank for pneumatic shifting? Thanks, Nemanja
A few weeks ago we assembled an old engine(Honda 600 f4i) and using a stroboscope we got the mark aligned at 92 crip value in motec. The engine fires...
Hi everyone, Just wanted to let the forums know about a new event that we are running next week. It's called DESIGN to WIN.
.
Hi, This is my first post - long time lurker but most questions seem to have been asked already! Has anyone had any experience of using...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules