Open forum for all things Formula SAE related.
The third round of testing at Calspan will be conducted on 21-22 June 2007. Four constructions are scheduled to be tested: + Michelin 21x8-13...
Greetings all, I’ve been sitting down in the odd spare minutes I’m getting here and there, and slapping together a bit of a thesis about what I...
Hi all, I've put this list together last year, and made it available to guys on our team and will do the same this year. It's up to individuals...
Unfortunately, there is no LINKS page on the FSAE.com website, so I put one together to help everyone. If you have any more, just post a reply,...
The FSAE team at Western Washington University has agreed to host a CAD file library for everyone. This will be a central place for teams to share...
Can anyone recommend some reading material on heat exchanger design? So far I hav been relying on intercooler theory on the web and old fluids and...
If you're new here, it's very likely that among almost 5000 forum members and close to 50,000 posts, your question has been asked. Well, at least...
There have been a number of papers written by participants of FSAE on various Formula SAE topics. Your university library may have the ability to...
Everyone, I would like to announce a new set of tutorials being created by SolidWorks, specific to the Formula SAE competition. The first video,...
Yeah, this is another FEA thread related to the chassis...but I dont think this has been discussed yet. How do you do a beam element FEA? I draw...
Hello, I would like to get some tips about which books should I get, to help me design a formula 1000 car or something similar. Main subjects...
Hello Friend, I want to ask, How formula to calculation the jounce damping and rebound damping ? last year our calculation still wrong in the...
Hello, I am Mohamed Hashim, the powertrain team leader in ZAgazig University Racing Team, Egypt. Firstly there was no RPM signal on tuner...
Hi, This is Apoorv from SRM University, India. We are currently in the fabrication phase of our vehicle. For our chassis main hoop we used...
Hello all, I am Ravi from UM-Dearborn. I have a question regarding the Gear-shifting efforts for sequential manual transmission...
Hey Guys, I am very keen to discuss our new beam axle design. I will be posting pics on photo bucket with the user name oz_olly. I will make...
Hi, 1-Is there any regulations regarding the insulation of the fuel tank from any heat source!? 2-If NO, should we apply the firewall...
Hi Recently we build a new fuel tank, but we are having a problem with the air cavities in the tank. We don't have enough time to make a new tank...
Has anyone measured coolant flow rate in a pipe? And I mean a closed system on a loaded (hot) engine.... What device did you use? Were you on...
Hi, With regards to rule EV4.11.1 in which says: "EV4.11.1 A circuit that is able to pre-charge the intermediate circuit to at least 90% of the...
The NYPD had a lot full of confiscated 4-wheelers and dirtbikes that hooligans were riding illegally on the street. Instead of putting them to a...
Good afternoon everyone, My name is Matt Smith and I am a member of Team SURTES at the University of Surrey. Last year I was a placement student...
Hello everyone or anyone, Some years ago a read a post about tire testing with a trailer rig (tire dynamometer). It tested slip angle vs...
Hi guys, I'm making some simulations with matlab to understand vehicle dynamics using a simple bicycle model. It requires to know some vehicle...
At the last few FSAE and Formula Student competitions, I have witnessed the occurrence of more and more ready-to-go, ready-to-bolt-in impact...
http://www.businesswire.com/news/home/20160505005018/en/Cooper-Tire-Sponsors-Formula-SAE-Design-Competition
Tomorrow is the last day for early registration for the 4-day OptimumG Applied Vehicle Dynamics for Race Car Design and Development that I will be...
Hey Guys , I've just finished making a monocoque CAD , but i just have an inquiry concerning the weight of the structure calculations , I've...
Hello Everyone, We had a small problem here. We wanted to purchase WILWOOD DYNAPRO SINGLE PISTON calliper of piston diameter 1.38" with center...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules