Open forum for all things Formula SAE related.
The third round of testing at Calspan will be conducted on 21-22 June 2007. Four constructions are scheduled to be tested: + Michelin 21x8-13...
Greetings all, I’ve been sitting down in the odd spare minutes I’m getting here and there, and slapping together a bit of a thesis about what I...
Hi all, I've put this list together last year, and made it available to guys on our team and will do the same this year. It's up to individuals...
Unfortunately, there is no LINKS page on the FSAE.com website, so I put one together to help everyone. If you have any more, just post a reply,...
The FSAE team at Western Washington University has agreed to host a CAD file library for everyone. This will be a central place for teams to share...
Can anyone recommend some reading material on heat exchanger design? So far I hav been relying on intercooler theory on the web and old fluids and...
If you're new here, it's very likely that among almost 5000 forum members and close to 50,000 posts, your question has been asked. Well, at least...
There have been a number of papers written by participants of FSAE on various Formula SAE topics. Your university library may have the ability to...
Everyone, I would like to announce a new set of tutorials being created by SolidWorks, specific to the Formula SAE competition. The first video,...
Many teams barely use .5in of travel, yet they have 2in based on damper travel and ratio - making it rule compliment. Independent? I guess a...
Hello everyone, i got the raw data from potentionmeter and wheelspeed but there are a lot of noise in it making analyzing data impossible that's...
Wanted to have a discussion about tire sizes - which is more suited, and for what. Our 10s (Keizer rim, hooiser 18') weigh 13lb each. An older set...
HELLO EVERYONE, I am in data acquisition department of PRAVEGA RACING.we go to fsg and fsi every year,currently i am developing a code to find car...
Hi, i'm new to the forum, wanted to ask a simple suspension question, which I haven't seen addressed on any of the other big suspension threads here...
Hi, guys. I'm fairly new to FSAE and the forums so excuse me if I make any mistakes, but I chose the task of taking our suspension system from steel...
I just happened across this yesterday. http://www.wazer.com/ A low cost 12"x18" cut area desktop waterjet. Although it is much slower than a...
We used a 52 teeths sprocket with dry tyres. The wheels we used were 195/50 R13. This year we are switching to R10 wheels and semi slicks. I did some...
Hi, We are first year team intending to participate in the formula student competition in the class 1 this year. I have some questions...
Hello everyone I am in vit university vellore FSAE team, last year we participated in FSG. we just started thinking about using matlab to analysis...
UTAS have made a lot of ambitious design changes and purchases this year. I feel the work I did last year to pull it all together has now led to...
Hi guys, I was just wondering if any team have ever tried to put some thermocouples inside their brake pad as per SAE J79. Thank you!
Gentlemen, We have a great opportunity for all involved in the FSAE Teams and other future automotive engineers to get hands on Research and...
For the (electric) rules stating that the Tractive System Energized Light might be visible from all directions: EV9.1.5 The TSEL must be clearly...
Our team has recently been picked up (luckily) on facebook for a rule that we missed in our accumulator segment design. EV4.5.8: “All tractive...
Hello All, I'm Adam Pate, a Longhorn Racing alumnus. I did some searching and noticed that there are a very small number of build threads on...
Hi FSAE Forums, I did a final project on fitting semi-parametric and non-parametric models to TTC data. I'll be giving a presentation about it...
Hello, We are a fsae team from dubai.we are running a honda CBR 600rr 2006 engine on the car with a pe3 ecu.we were able to idle the engine at...
the last disscution about that was at 2008 and it sais there that FSAE judges will never accept rod ends in bending as good engineering. is this...
http://www.fsaeonline.com/page.aspx?pageid=a9aedcb6-c965-4c34-a02f-625a6ec5c89f The 2017/18 rules were released a little while ago for comment....
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules