PDA

View Full Version : F4i needed for CMM project



mojo
07-12-2006, 02:01 PM
If anyone has and f4i (pieces are best, not complete engine) and is in the North Carolina area, please let me know. I have access to a Romer Arm CMM and would like get an accurate CAD model together for use by any and all that want it.

-
07-14-2006, 09:24 AM
Someone had made a pretty accurate f4i model recently. Try searching the forums to see who it was, I seem to remember that he left his email from which to contact him by.

Wes Johnson
07-17-2006, 12:29 PM
Mojo: you have a private message.

Wes Johnson
Clemson FSAE

Wes Johnson
07-24-2006, 09:13 AM
Mojo, you have another private message (forgot to get your contact info...woops!)

-Wes

Mike Cook
08-08-2006, 01:02 PM
I have a broken apart f4i engine in my car. I'm down in mooresville for a while. I actually just cmm'd the engine but I wouldn't mind comparing my data with someone elses. Give me a call: 410-570-3651

Mike

Walker
09-14-2006, 06:58 AM
Mike,
Do you think it would be possible for me to get a copy of your CAD model for the f4i?

Thanks

Jersey Tom
09-16-2006, 07:58 AM
Update on this??

idunnogui
10-19-2006, 07:26 AM
Well I hate to be a bother but could i get a copy of the CAD model of the F4i as well.

Much appreciated,
Gui.

Mike Cook
11-08-2006, 09:44 PM
http://fsae.com/eve/forums/a/tpc/f/125607348/m/40910644...10644531#40910644531 (http://fsae.com/eve/forums/a/tpc/f/125607348/m/40910644531?r=40910644531#40910644531)