PDA

View Full Version : 2005 ODU Dyno Video



OrangeODU
05-04-2005, 10:03 AM
http://www.odumotorsports.com/video/2005%20ODU%20FSAE%20-%20Dyno.wmv

drivetrainUW-Platt
05-04-2005, 10:25 AM
ha, sweet, some mean torque in that thing http://fsae.com/groupee_common/emoticons/icon_smile.gif

95M3Racer
05-05-2005, 11:44 AM
The front of that thing was definitely NOT strapped down. Man that was hella sketchy!

Ryan McCauley
05-05-2005, 08:24 PM
play it frame by frame after it comes down... you see the straps on the front...

drivetrainUW-Platt
05-06-2005, 06:42 AM
not saying your dyno opperator is incompetant but I have heard of more than one dyno shop that put in the dyno before they hired someone that knew how to run one......

OrangeODU
05-06-2005, 11:15 AM
nah man... we just had it strapped a lil too high on the back end and too low on the front end... we had to move the straps up in the back because we kept getting wheel spin and we just didn't think to move up the front straps...

Nima
02-07-2006, 02:46 AM
I don't know why the front wheels go up
if any one know please answer me
nima_r@me.iut.ac.ir

Homemade WRX
02-11-2006, 04:34 PM
Originally posted by Nima:
I don't know why the front wheels go up
if any one know please answer me
nima_r@me.iut.ac.ir
well, I'm the guy behind the camera in this video, so I know first hand...
all afternoon we had either been spinning tires or the clutch would be slipping and we decided to try and help get the rear to hook up a bit more and raised the tie down on the chassis....the front was still strapped but at and anchor distance for a full length car...well with the new rear tie down point on the chassis we were still having issues hooking up at the rubber and with the clutch...until they both held...then you get the wheelie

drivetrainUW-Platt
02-22-2006, 08:56 AM
dyno wheelies....sounds like a new event at competition