Frank
11-19-2004, 02:57 AM
Aluminium radiator, core dimensions 430 * 200 * 28 mm
Manufactured by PWR, a leading Australian manufacturer
www.pwr.com.au (http://www.pwr.com.au)
Perfect Condition. Has #16 screw fittings, and #4 bleed holes
CAD (3D) model translations available in "Parasolid" and IGES .
http://www.uq.edu.au/fsae/Radiator.X_T
http://www.uq.edu.au/fsae/Radiator.igs
Not suitably large for FSAE car used in Australian condition.
Well enough for "English" conditions, or colder USA conditions.
Might suit single cylinder car used in Australian conditions
Shrouds included (if wanted) ((but not the fans))
AUS $200
GBP 85
+ Postage (arranged by you)
Frank Evans
University of Queensland, 4072 (postcode)
Brisbane
Queensland
Australia
http://www.uq.edu.au/fsae/radiator.jpg
Manufactured by PWR, a leading Australian manufacturer
www.pwr.com.au (http://www.pwr.com.au)
Perfect Condition. Has #16 screw fittings, and #4 bleed holes
CAD (3D) model translations available in "Parasolid" and IGES .
http://www.uq.edu.au/fsae/Radiator.X_T
http://www.uq.edu.au/fsae/Radiator.igs
Not suitably large for FSAE car used in Australian condition.
Well enough for "English" conditions, or colder USA conditions.
Might suit single cylinder car used in Australian conditions
Shrouds included (if wanted) ((but not the fans))
AUS $200
GBP 85
+ Postage (arranged by you)
Frank Evans
University of Queensland, 4072 (postcode)
Brisbane
Queensland
Australia
http://www.uq.edu.au/fsae/radiator.jpg