PDA

View Full Version : Adams/Car Technical Representative Opening



Joe_Little
05-21-2012, 06:01 AM
Hey guys,

We are opening up a technical representative position here in Ann Arbor. Here's the short of it:

- Become an expert using Adams products, focused on Adams/Car, the most widely used multi-body dynamics and vehicle dynamics CAE packages in the world
- Work with key North American Adams/Car key accounts, which include all auto makers with major R&D facilities in the U.S.
- Support the use of Adams/Car in Vehicle Dynamics, Durability, Drivetrain, and other R&D programs
- Spend a large amount of time both on site at various customer sites and at our Ann Arbor headquarters working closely with experienced Adams/Cars users (like myself!)


What we're looking for good, applicable understanding of/experience with at least a few, ideally several, of the following:


- General understanding of mechanical simulation
- Vehicle Dynamics
- Multi-Body Dynamics
- Experience with CAE tools (FEA, CFD, or MBD)
- Experience with Adams
- Computer Programming
and of course...
- Formula SAE design and leadership


This job will be based in Ann Arbor, Michigan and begins ASAP. The above is an informal synopsis, and is not an official MSC job description (available on request)

If you're interested, email me your cover letter and resume at joseph.little[at]mscsoftware.com

Regards,
Joe Little

Joe_Little
05-21-2012, 06:01 AM
Hey guys,

We are opening up a technical representative position here in Ann Arbor. Here's the short of it:

- Become an expert using Adams products, focused on Adams/Car, the most widely used multi-body dynamics and vehicle dynamics CAE packages in the world
- Work with key North American Adams/Car key accounts, which include all auto makers with major R&D facilities in the U.S.
- Support the use of Adams/Car in Vehicle Dynamics, Durability, Drivetrain, and other R&D programs
- Spend a large amount of time both on site at various customer sites and at our Ann Arbor headquarters working closely with experienced Adams/Cars users (like myself!)


What we're looking for good, applicable understanding of/experience with at least a few, ideally several, of the following:


- General understanding of mechanical simulation
- Vehicle Dynamics
- Multi-Body Dynamics
- Experience with CAE tools (FEA, CFD, or MBD)
- Experience with Adams
- Computer Programming
and of course...
- Formula SAE design and leadership


This job will be based in Ann Arbor, Michigan and begins ASAP. The above is an informal synopsis, and is not an official MSC job description (available on request)

If you're interested, email me your cover letter and resume at joseph.little[at]mscsoftware.com

Regards,
Joe Little

Joe_Little
09-05-2012, 03:24 PM
Still open..