regd. the selection of a material for racing..

[ArunDilipan]

i have enrolled myself to fabricate a car for a race. i have to fabricate a car's roll cage obeying their specs. those specs are as listed below

can use a material which s having a carbon content of 0.18% and its bending strength and stiffness should be more or less equal to 1018 steel

so pls. guide wat material can i use to fabricate a roll cage for ma car which s to going to participte n a racing.

[ArunDilipan]

i have enrolled myself to fabricate a car for a race. i have to fabricate a car's roll cage obeying their specs. those specs are as listed below

can use a material which s having a carbon content of 0.18% and its bending strength and stiffness should be more or less equal to 1018 steel

so pls. guide wat material can i use to fabricate a roll cage for ma car which s to going to participte n a racing.

[,4lex S.]

How about... 1018 steel.

[PatClarke]

Arun,

Firstly, you should introduce yourself.

Secondly, you should speak in English, not some juvenile text gibberish.

And thirdly, don't ask stupid questions. As .4lex S suggested, use 1018 (or more commonly, 1020) steel!

Pat

PS, you also posted in the wrong sub forum! This one is for Dynamic events!