PDA

View Full Version : Wanted: 1 3/8" Titanium Mandrel Bends



Charlie
12-12-2002, 12:49 AM
I'm looking for a source for 1 3"8 titanium mandrel bends. Burns Stainless does not have the capability to make them, I already inquired. Have any teams found a source for these?

Thanks

-Charlie Ping
Auburn University FSAE 1999-present

Charlie
12-12-2002, 12:49 AM
I'm looking for a source for 1 3"8 titanium mandrel bends. Burns Stainless does not have the capability to make them, I already inquired. Have any teams found a source for these?

Thanks

-Charlie Ping
Auburn University FSAE 1999-present

Dominic Venieri
12-12-2002, 08:44 AM
If you can get the tubing in straight lengths, email me venied@rpi.edu.

www.formularpi.com (http://www.formularpi.com)

streetsports
03-25-2009, 09:44 PM
i know adam over at http://www.mandrel-bends.com/c...ffiliate_banner_id=3 (http://www.mandrel-bends.com/catalog/index.php?ref=1&affiliate_banner_id=3) was gonna start doing titanium...give him a call or e-mail...tell em jessie sent ya