Suspension/brake/misc. parts for sale

[Marc Jaxa-Rozen]

We are clearing out parts from previous cars and have plenty of stuff to sell...make an offer.

2 x CNC master cylinders (http://www.etudiants.polymtl.ca/fsae/gallery/view_photo.php?set_albumName=ForSale&id=CRW_9576)
1 x stock Torsen differential housing (http://www.etudiants.polymtl.ca/fsae/gallery/view_photo.php?set_albumName=ForSale&id=CRW_9577)
4 x Wilwood Dynalite two-piston calipers (http://www.etudiants.polymtl.ca/fsae/gallery/view_photo.php?set_albumName=ForSale&id=CRW_9584)
2 x Wilwood 3/4 master cylinders (http://www.etudiants.polymtl.ca/fsae/gallery/view_photo.php?set_albumName=ForSale&id=CRW_9586)
2 x CNC two-piston calipers (http://www.etudiants.polymtl.ca/fsae/gallery/view_photo.php?set_albumName=ForSale&id=CRW_9595)
2 x AP Racing CP2623 master cylinders (http://www.etudiants.polymtl.ca/fsae/gallery/view_photo.php?set_albumName=ForSale&id=CRW_9600) (bought for 135$/each last year)

Also some misc. stuff, e.g. Wilwood proportioning valve, F4i throttle bodies, springs, etc. A full photo gallery is available here (http://www.etudiants.polymtl.ca/fsae/gallery/view_album.php?set_albumName=ForSale).

Feel free to contact us here or at fsae@polymtl.ca for any further info.

Marc Jaxa-Rozen
École Polytechnique de Montréal
http://www.fsae.polymtl.ca

[Marc Jaxa-Rozen]

We also have three CBR600F4i engines available:

<LI>~180 psi on all four with 4000 miles/6500 km in the motorcycle, one competition in the car and no dyno work; shortened stock oil pan with baffling (lowers the engine 1.5"), 12T sprocket and no swingarm mount

<LI>~170 psi and about 12,500 miles/20,000 km

<LI>#1 cylinder shot, likely piston rings; the others compress fine, good for parts or freshman practice.

Marc Jaxa-Rozen
École Polytechnique de Montréal
http://www.fsae.polymtl.ca

[Sathersc]

What are the lengths of the shock sets eyelet to eyelet fully extended, and the amount of travel on them?

Also may be interested in the best of the f4i's you have left.

[Marc Jaxa-Rozen]

The Elkas are 10.25" eye to eye with a 3" stroke (a 0.5" bump stop is currently installed, so 2.5" free travel). Let me know if you need a CAD model.

The Stratos are 8.25" with 2.25" travel.

Marc Jaxa-Rozen
École Polytechnique de Montréal
http://www.fsae.polymtl.ca

[Albertodsa]

send me price for all to albertodsa@gmail.com

thanks

[drivetrainUW-Platt]

please send information on the shocks including a price to duwem@uwplatt.edu
Thanks

[Marc Jaxa-Rozen]

Both sets of shocks are sold, sorry.

Marc Jaxa-Rozen
École Polytechnique de Montréal
http://www.fsae.polymtl.ca

[Benny]

Could you send me the CAD model of Elka and Stratos Shocks to benny_dyn@126.com?

Thanks a lot