Nihal
05-28-2010, 05:36 PM
We have 3 job openings here at Performance Friction. If anyone is interested don't hesitate to send a resume.
1. MANUFACTURING PROCESS ENGINEERS
Performance Friction Corporation is a racing and high performance disc brake manufacturer in immediate need for Manufacturing Process Engineers, at our corporate facility in Clover, SC. We are approximately 19-miles south southwest of Charlotte, NC.
We are a leading researcher and innovator in friction brake technology and compete in the original equipment, aftermarket and racing market segments.
High energy sense of urgency required
Root cause problem solving skills including statistical analysis and DOEs
Hands on environment
Innovation required
TS16949 system
High level of responsibility
B.S. degree in Mechanical, Electrical, or Chemical Engineering
Please send your resume and salary requirements in confidence to:
Mail: Performance Friction Corporation
Attn: Process Engineers
P.O. Box 819
Clover, SC 29710
Fax: (803) 222-2144
Email: recruiting@performancefriction.com
Our website: www.performancefriction.com (http://www.performancefriction.com)
2. MECHANICAL DESIGN ENGINEERS
RACING and HIGH PERFORMANCE DISC BRAKE MANUFACTURER in immediate need for Design & Development Engineers. We are a leading researcher and innovator in friction brake technology and compete in the original equipment, aftermarket and racing market segments.
PRIMARY RESPONSIBILITIES:
Comprehensive design, development and testing of wheel end brake components for automotive and racing applications.
Candidates must have the ability to apply their technical skills in engineering design.
Standards and expectations are very high for a world-class product.
SolidWorks and Solid Modeling.
FEA Analysis.
EDUCATION / EXPERIENCE REQUIREMENTS:
3 years design or co-op experience is a plus.
Masters degree a plus.
Formula SAE a plus.
Training will be available.
APPLICATION INSTRUCTIONS:
E-Mail: recruiting@performancefriction.com
Fax: (803) 222-2144
Mail: Performance Friction Corporation
Attn: Design & Development Engineers
P.O. Box 819
Clover, SC 29710
Visit our website at: www.performancefriction.com (http://www.performancefriction.com)
3. TEST ENGINEER
Data-driven Automotive Brake Manufacturer is looking for a motivated Test Engineer in our Brake Dynamometer/Vehicle Test Lab. A successful candidate must be goal oriented and driven to promote a world-class testing environment. The Test Engineer will be responsible for programming of dynamometer control system and data acquisition system, instrumentation, signal processing, data post-processing using Excel and VBA macros, evaluating and interpreting measurement data, and data management.
The individual must have a B.S.M.E. or B.S.E.E. minimum. Hands-on experience with PC-based data acquisition, instrumentation, and machine control, MATLAB and PASCAL programming highly desired. This is an excellent opportunity to learn and to positively affect a fast paced company.
Visit our website at: www.performancefriction.com (http://www.performancefriction.com)
Send Resumes To: Attn: Dynamometer Test Engineer
Performance Friction Corporation
P.O. Box 819
Clover, SC 29710
Fax: (803) 222-2144
Recruiting@performancefriction.com
1. MANUFACTURING PROCESS ENGINEERS
Performance Friction Corporation is a racing and high performance disc brake manufacturer in immediate need for Manufacturing Process Engineers, at our corporate facility in Clover, SC. We are approximately 19-miles south southwest of Charlotte, NC.
We are a leading researcher and innovator in friction brake technology and compete in the original equipment, aftermarket and racing market segments.
High energy sense of urgency required
Root cause problem solving skills including statistical analysis and DOEs
Hands on environment
Innovation required
TS16949 system
High level of responsibility
B.S. degree in Mechanical, Electrical, or Chemical Engineering
Please send your resume and salary requirements in confidence to:
Mail: Performance Friction Corporation
Attn: Process Engineers
P.O. Box 819
Clover, SC 29710
Fax: (803) 222-2144
Email: recruiting@performancefriction.com
Our website: www.performancefriction.com (http://www.performancefriction.com)
2. MECHANICAL DESIGN ENGINEERS
RACING and HIGH PERFORMANCE DISC BRAKE MANUFACTURER in immediate need for Design & Development Engineers. We are a leading researcher and innovator in friction brake technology and compete in the original equipment, aftermarket and racing market segments.
PRIMARY RESPONSIBILITIES:
Comprehensive design, development and testing of wheel end brake components for automotive and racing applications.
Candidates must have the ability to apply their technical skills in engineering design.
Standards and expectations are very high for a world-class product.
SolidWorks and Solid Modeling.
FEA Analysis.
EDUCATION / EXPERIENCE REQUIREMENTS:
3 years design or co-op experience is a plus.
Masters degree a plus.
Formula SAE a plus.
Training will be available.
APPLICATION INSTRUCTIONS:
E-Mail: recruiting@performancefriction.com
Fax: (803) 222-2144
Mail: Performance Friction Corporation
Attn: Design & Development Engineers
P.O. Box 819
Clover, SC 29710
Visit our website at: www.performancefriction.com (http://www.performancefriction.com)
3. TEST ENGINEER
Data-driven Automotive Brake Manufacturer is looking for a motivated Test Engineer in our Brake Dynamometer/Vehicle Test Lab. A successful candidate must be goal oriented and driven to promote a world-class testing environment. The Test Engineer will be responsible for programming of dynamometer control system and data acquisition system, instrumentation, signal processing, data post-processing using Excel and VBA macros, evaluating and interpreting measurement data, and data management.
The individual must have a B.S.M.E. or B.S.E.E. minimum. Hands-on experience with PC-based data acquisition, instrumentation, and machine control, MATLAB and PASCAL programming highly desired. This is an excellent opportunity to learn and to positively affect a fast paced company.
Visit our website at: www.performancefriction.com (http://www.performancefriction.com)
Send Resumes To: Attn: Dynamometer Test Engineer
Performance Friction Corporation
P.O. Box 819
Clover, SC 29710
Fax: (803) 222-2144
Recruiting@performancefriction.com